Initial commit

.gitattributes

@@ -0,0 +1,2 @@
+# Auto detect text files and perform LF normalization
+* text=auto

LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2018 Tobias Schürg
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

README.md

@@ -0,0 +1 @@
+# MH-Z19B CO2 Module

mhz19-2.ino

@@ -0,0 +1,101 @@
+
+#include <SoftwareSerial.h>
+SoftwareSerial co2Serial(7, 6); // define MH-Z19 RX TX
+unsigned long startTime = millis();
+
+void setup() {
+  Serial.begin(9600);
+  co2Serial.begin(9600);
+  pinMode(9, INPUT);
+}
+
+void loop() {
+  Serial.println("------------------------------");
+  Serial.print("Time from start: ");
+  Serial.print((millis() - startTime) / 1000);
+  Serial.println(" s");
+  int ppm_uart = readCO2UART();
+  int ppm_pwm = readCO2PWM();
+  delay(5000);
+}
+
+int readCO2UART() {
+  byte cmd[9] = {0xFF, 0x01, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79};
+  byte response[9]; // for answer
+
+  Serial.println("Sending CO2 request...");
+  co2Serial.write(cmd, 9); //request PPM CO2
+
+  // clear the buffer
+  memset(response, 0, 9);
+  int i = 0;
+  while (co2Serial.available() == 0) {
+    //    Serial.print("Waiting for response ");
+    //    Serial.print(i);
+    //    Serial.println(" s");
+    delay(1000);
+    i++;
+  }
+  if (co2Serial.available() > 0) {
+    co2Serial.readBytes(response, 9);
+  }
+  // print out the response in hexa
+  for (int i = 0; i < 9; i++) {
+    Serial.print(String(response[i], HEX));
+    Serial.print("   ");
+  }
+  Serial.println("");
+
+  // checksum
+  byte check = getCheckSum(response);
+  if (response[8] != check) {
+    Serial.println("Checksum not OK!");
+    Serial.print("Received: ");
+    Serial.println(response[8]);
+    Serial.print("Should be: ");
+    Serial.println(check);
+  }
+
+  // ppm
+  int ppm_uart = 256 * (int)response[2] + response[3];
+  Serial.print("PPM UART: ");
+  Serial.println(ppm_uart);
+
+  // temp
+  byte temp = response[4] - 40;
+  Serial.print("Temperature? ");
+  Serial.println(temp);
+
+  // status
+  byte status = response[5];
+  Serial.print("Status? ");
+  Serial.println(status);
+  if (status == 0x40) {
+    Serial.println("Status OK");
+  }
+
+  return ppm_uart;
+}
+
+byte getCheckSum(char *packet) {
+  byte i;
+  unsigned char checksum = 0;
+  for (i = 1; i < 8; i++) {
+    checksum += packet[i];
+  }
+  checksum = 0xff - checksum;
+  checksum += 1;
+  return checksum;
+}
+
+int readCO2PWM() {
+  unsigned long th, tl, ppm_pwm = 0;
+  do {
+    th = pulseIn(9, HIGH, 1004000) / 1000;
+    tl = 1004 - th;
+    ppm_pwm = 5000 * (th - 2) / (th + tl - 4);
+  } while (th == 0);
+  Serial.print("PPM PWM: ");
+  Serial.println(ppm_pwm);
+  return ppm_pwm;
+}